Wikiadmin at 21:37, 4 January 2019

2019-01-04T21:37:01Z

Wikiadmin at 08:08, 11 July 2015

2015-07-11T08:08:37Z

Wikiadmin at 08:14, 25 April 2015

2015-04-25T08:14:51Z

Wikiadmin at 08:23, 21 February 2013

2013-02-21T08:23:12Z

Wikiadmin at 18:37, 20 January 2013

2013-01-20T18:37:16Z

Wikiadmin: Created page with "=== switch_info === This plugin reports 3COM 3CDSG port statistics. The plugin should be saved with a filename 'switch_info___' (triple underscore at the end is intentional a..."

2012-04-21T16:34:53Z

Created page with "=== switch_info === This plugin reports 3COM 3CDSG port statistics. The plugin should be saved with a filename 'switch_info___' (triple underscore at the end is intentional a..."

New page

=== switch_info ===

This plugin reports 3COM 3CDSG port statistics. The plugin should be saved with a filename 'switch_info___' (triple underscore at the end is intentional and a link can then be generated in the munin plugins directory for each port requiring monitoring:

ln -s /path/switch_info___ /etc/munin/plugins/switch_info_192.168.3.2_101_modem

or:

ln -s /path/switch_info___ /etc/munin/plugins/switch_info_enet-switch_107_ps3

assuming that 'enet-switch' will resolve in your DNS to the IP of the required device.

The three parameters at the end of each link are:

* the name or IP address of your 3CDSG switch
* the port number this entry is referring to (e.g. 101 through 108 for the 3CDSG8)
* the shorthand name for the device connected to this port (no spaces or _ in the name)

#!/bin/sh
#
# Plugin to report switch port statistics.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
IP_P_ALIAS=${0##*/switch-info_}
# echo $IP_P_ALIAS
ALIAS=${IP_P_ALIAS##*_}
# echo $ALIAS
SWITCH=${IP_P_ALIAS%%_[0-9]*_$ALIAS}
# echo $SWITCH
PORT_ALIAS=${IP_P_ALIAS:(`expr length $SWITCH - length $IP_P_ALIAS + 1`)}
PORT=${PORT_ALIAS%%_$ALIAS}
# echo $PORT
if [ "$1" = "config" ]; then
echo 'graph_category switch'
echo 'graph_title Switch Port ('$PORT') ['$ALIAS'] I/O'
echo 'graph_vlabel Counts per second'
# echo 'graph_period minute'
echo 'graph_args --base 1024 -l 0 '
echo 'switch_port_'$PORT'_in.label Port input (octets)'
echo 'switch_port_'$PORT'_in.draw LINE1'
echo 'switch_port_'$PORT'_in.type COUNTER'
echo 'switch_port_'$PORT'_in_uni.label Port input unicast (packets)'
echo 'switch_port_'$PORT'_in_uni.draw LINE1'
echo 'switch_port_'$PORT'_in_uni.type COUNTER'
echo 'switch_port_'$PORT'_in_nonuni.label Port input non-unicast (packets)'
echo 'switch_port_'$PORT'_in_nonuni.draw LINE1'
echo 'switch_port_'$PORT'_in_nonuni.type COUNTER'
echo 'switch_port_'$PORT'_in_discards.label Port input discards (octets)'
echo 'switch_port_'$PORT'_in_discards.draw LINE1'
echo 'switch_port_'$PORT'_in_discards.type COUNTER'
echo 'switch_port_'$PORT'_in_errors.label Port input errors (octets)'
echo 'switch_port_'$PORT'_in_errors.draw LINE1'
echo 'switch_port_'$PORT'_in_errors.type COUNTER'
echo 'switch_port_'$PORT'_in_unknown.label Port input unknown protocols (octets)'
echo 'switch_port_'$PORT'_in_unknown.draw LINE1'
echo 'switch_port_'$PORT'_in_unknown.type COUNTER'
echo 'switch_port_'$PORT'_out.label Port output (octets)'
echo 'switch_port_'$PORT'_out.draw LINE1'
echo 'switch_port_'$PORT'_out.type COUNTER'
echo 'switch_port_'$PORT'_out_uni.label Port output unicast (packets)'
echo 'switch_port_'$PORT'_out_uni.draw LINE1'
echo 'switch_port_'$PORT'_out_uni.type COUNTER'
echo 'switch_port_'$PORT'_out_nonuni.label Port output non-unicast (packets)'
echo 'switch_port_'$PORT'_out_nonuni.draw LINE1'
echo 'switch_port_'$PORT'_out_nonuni.type COUNTER'
echo 'switch_port_'$PORT'_out_discards.label Port output discards (octets)'
echo 'switch_port_'$PORT'_out_discards.draw LINE1'
echo 'switch_port_'$PORT'_out_discards.type COUNTER'
echo 'switch_port_'$PORT'_out_errors.label Port output errors (octets)'
echo 'switch_port_'$PORT'_out_errors.draw LINE1'
echo 'switch_port_'$PORT'_out_errors.type COUNTER'
echo 'switch_port_'$PORT'_out_qlen.label Port output queue length (octets)'
echo 'switch_port_'$PORT'_out_qlen.draw LINE1'
echo 'switch_port_'$PORT'_out_qlen.type COUNTER'
exit 0
fi
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifInOctets.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_in.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifInUcastPkts.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_in_uni.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifInNUcastPkts.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_in_nonuni.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifInDiscards.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_in_discards.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifInErrors.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_in_errors.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifInUnknownProtos.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_in_unknown.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifOutOctets.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_out.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifOutUcastPkts.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_out_uni.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifOutNUcastPkts.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_out_nonuni.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifOutDiscards.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_out_discards.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifOutErrors.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_out_errors.value %s\n",$NF}'
/usr/bin/snmpget -c public -v 1 $SWITCH "IF-MIB::ifOutQLen.$PORT" | /usr/bin/awk -vp=$PORT '{printf "switch_port_"p"_out_qlen.value %s\n",$NF}'

----

<adsense>1</adsense>

← Older revision		Revision as of 21:37, 4 January 2019
Line 100:		Line 100:


−	This website publishes a ~~[http://ipv6.chappell-family.com/html/privacy_policy.html~~ Privacy Policy.] Continued use of this website implies your consent to the use of data outlined in the policy.	+	This website publishes a Privacy Policy (link at the bottom of every page). Continued use of this website implies your consent to the use of data outlined in the policy.
−
−	~~----~~

@@ Line 1: / Line 1: @@
-Munin plugin supporting the 3COM 3CDSG port statistics.
+Munin plugin supporting the 3COM 3CDSG8 port statistics.
 === switch_info ===
@@ Line 102: / Line 100: @@
-This website publishes a [http://ipv6.chappell-family.com/html/privacy_policy.html Privacy Policy.] Continued use of this website implies your consent to the storage of data outlined in the policy.
+This website publishes a [http://ipv6.chappell-family.com/html/privacy_policy.html Privacy Policy.] Continued use of this website implies your consent to the use of data outlined in the policy.
 ----

← Older revision		Revision as of 08:14, 25 April 2015
Line 105:		Line 105:

	----		----
−
−
−	~~<adsense>1</adsense>~~

← Older revision		Revision as of 08:23, 21 February 2013
Line 1:		Line 1:
	Munin plugin supporting the 3COM 3CDSG port statistics.		Munin plugin supporting the 3COM 3CDSG port statistics.
		+
		+	<analytics uacct="UA-27654202-1" ></analytics>

	=== switch_info ===		=== switch_info ===