579
edits
Changes
Jump to navigation
Jump to search
Created page with "Enter the command line via menu item 24.8 or directly with later modem versions. ==To allow direct access to your external (WAN) IP address:== The steps below make the chan..."
Enter the command line via menu item 24.8 or directly with later modem versions.
==To allow direct access to your external (WAN) IP address:==
The steps below make the change permanent, although the command can equally be used at the normal ras> prompt which will survive until the next power-off/reboot:
* sys edit autoexec.net
* i
* ip nat loopback on
* x
==To alter the ADSL target SNR:==
* wan adsl targetnoise [0xfa .. 0x06]
final number is in units of 0.5dB, so 0x06 is equivalent to a +3dB increase in the target (improved stability).
==To disable rate adaption:==
* wan adsl rateadap off
==To adjust the stale session timeouts:==
* sys tos timeout icmp 60
* sys tos timeout udp 45
Note: these commands need to be put into the autoexec.net file in order to survive a power-off/reboot.
----
<adsense>1</adsense>
==To allow direct access to your external (WAN) IP address:==
The steps below make the change permanent, although the command can equally be used at the normal ras> prompt which will survive until the next power-off/reboot:
* sys edit autoexec.net
* i
* ip nat loopback on
* x
==To alter the ADSL target SNR:==
* wan adsl targetnoise [0xfa .. 0x06]
final number is in units of 0.5dB, so 0x06 is equivalent to a +3dB increase in the target (improved stability).
==To disable rate adaption:==
* wan adsl rateadap off
==To adjust the stale session timeouts:==
* sys tos timeout icmp 60
* sys tos timeout udp 45
Note: these commands need to be put into the autoexec.net file in order to survive a power-off/reboot.
----
<adsense>1</adsense>