579
edits
Changes
Jump to navigation
Jump to search
Created page with "== DH67CF Plugins == These plugins report the === DH67CF Fans === This plugin reports the fan speeds for an Intel DH67CF motherboard. The plugin should be saved with a fil..."
== DH67CF Plugins ==
These plugins report the
=== DH67CF Fans ===
This plugin reports the fan speeds for an Intel DH67CF motherboard. The plugin should be saved with a filename 'dh67cf_fans' and a link can then be generated in the munin plugins directory:
'''$ ln -s /path/dh67cf_fans /etc/munin/plugins/dh67cf_fans'''
<pre>
#!/bin/sh
#
# Plugin to report D945GCLF2 motherboard temperatures. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_fans.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard Fan Speeds'
echo 'graph_vlabel RPM'
echo 'mboard_fan1.label Inlet fan'
echo 'mboard_fan1.draw LINE1'
echo 'mboard_fan1.type GAUGE'
echo 'mboard_fan2.label CPU fan'
echo 'mboard_fan2.draw LINE1'
echo 'mboard_fan2.type GAUGE'
echo 'mboard_fan1.warning 200:1200'
echo 'mboard_fan2.warning 200:2500'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +85.0°C)
nct6775-isa-0290
Adapter: ISA adapter
Vcore: +0.98 V (min = +0.00 V, max = +1.74 V)
in1: +1.09 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.42 V (min = +2.98 V, max = +3.63 V)
in4: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.99 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.42 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.30 V (min = +2.70 V, max = +3.30 V)
fan1: 421 RPM (min = 0 RPM, div = 32) ALARM
fan2: 1004 RPM (min = 0 RPM, div = 32) ALARM
fan3: 0 RPM (min = 0 RPM, div = 128)
fan4: 0 RPM (div = 128)
SYSTIN: +30.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = diode
CPUTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUXTIN: -128.0°C sensor = diode
PECI Agent 0: +36.0°C (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_TEMP: +49.0°C (high = +80.0°C, hyst = +75.0°C)
PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C)
cpu0_vid: +2.050 V
TESTMODE
fi
awk '{if($1~"fan1:"){printf"mboard_fan1.value %s\n",$2}}' $TMPFILE
awk '{if($1~"fan2:"){printf"mboard_fan2.value %s\n",$2}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
</pre>
=== DH67CF Temperatures ===
This plugin reports the temperatures for an Intel DH67CF motherboard. The plugin should be saved with a filename 'dh67cf_temp' and a link can then be generated in the munin plugins directory:
'''$ ln -s /path/dh67cf_temp /etc/munin/plugins/dh67cf_temp'''
<pre>
#!/bin/sh
#
# Plugin to report DH67CF motherboard temperatures. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_temps.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard Temperatures'
echo 'graph_vlabel Degrees Celsius'
echo 'mboard_core0_temp.label Core0 Temperature'
echo 'mboard_core0_temp.draw LINE1'
echo 'mboard_core0_temp.type GAUGE'
echo 'mboard_core1_temp.label Core1 Temperature'
echo 'mboard_core1_temp.draw LINE1'
echo 'mboard_core1_temp.type GAUGE'
echo 'mboard_chipset_temp.label Chipset Temperature'
echo 'mboard_chipset_temp.draw LINE1'
echo 'mboard_chipset_temp.type GAUGE'
echo 'mboard_system_temp.label System Temperature'
echo 'mboard_system_temp.draw LINE1'
echo 'mboard_system_temp.type GAUGE'
echo 'mboard_core0_temp.warning :75'
echo 'mboard_core1_temp.warning :75'
echo 'mboard_chipset_temp.warning :70'
echo 'mboard_system_temp.warning :45'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +85.0°C)
nct6775-isa-0290
Adapter: ISA adapter
Vcore: +0.98 V (min = +0.00 V, max = +1.74 V)
in1: +1.09 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.42 V (min = +2.98 V, max = +3.63 V)
in4: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.99 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.42 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.30 V (min = +2.70 V, max = +3.30 V)
fan1: 421 RPM (min = 0 RPM, div = 32) ALARM
fan2: 1004 RPM (min = 0 RPM, div = 32) ALARM
fan3: 0 RPM (min = 0 RPM, div = 128)
fan4: 0 RPM (div = 128)
SYSTIN: +30.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = diode
CPUTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUXTIN: -128.0°C sensor = diode
PECI Agent 0: +36.0°C (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_TEMP: +49.0°C (high = +80.0°C, hyst = +75.0°C)
PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C)
cpu0_vid: +2.050 V
TESTMODE
fi
awk '{if($1~"Core"){n=substr($2,1,length($2)-1);printf"mboard_core%d_temp.value %s\n",n,substr($3,1,1+index($3,"."))}}' $TMPFILE
awk '{if($1~"PCH_CHIP_TEMP:"){printf"mboard_chipset_temp.value %s\n",substr($2,1,1+index($2,"."))}}' $TMPFILE
awk '{if($1~"CPUTIN:"){printf"mboard_system_temp.value %s\n",substr($2,1,1+index($2,"."))}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
</pre>
=== DH67CF Voltages ===
This plugin reports the voltages for an Intel DH67CF motherboard. The plugin should be saved with a filename 'dh67cf_voltages' and a link can then be generated in the munin plugins directory:
'''$ ln -s /path/dh67cf_voltages /etc/munin/plugins/dh67cf_voltages'''
<pre>
#!/bin/sh
#
# Plugin to report DH67CF motherboard voltages. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_volts.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard Voltages'
echo 'graph_vlabel Volts'
echo 'mboard_vcore.label Vcore'
echo 'mboard_vcore.draw LINE1'
echo 'mboard_vcore.type GAUGE'
echo 'mboard_avcc.label AVcc'
echo 'mboard_avcc.draw LINE1'
echo 'mboard_avcc.type GAUGE'
echo 'mboard_3v3.label +3V3'
echo 'mboard_3v3.draw LINE1'
echo 'mboard_3v3.type GAUGE'
echo 'mboard_3vsb.label +3Vsb'
echo 'mboard_3vsb.draw LINE1'
echo 'mboard_3vsb.type GAUGE'
echo 'mboard_vbat.label Vbat'
echo 'mboard_vbat.draw LINE1'
echo 'mboard_vbat.type GAUGE'
echo 'mboard_cpu.label CPU0 Vid'
echo 'mboard_cpu.draw LINE1'
echo 'mboard_cpu.type GAUGE'
echo 'mboard_avcc.warning 2.98:3.63'
echo 'mboard_3v3.warning 2.98:3.63'
echo 'mboard_vbat.warning 2.98:3.63'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +85.0°C)
nct6775-isa-0290
Adapter: ISA adapter
Vcore: +0.98 V (min = +0.00 V, max = +1.74 V)
in1: +1.09 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.42 V (min = +2.98 V, max = +3.63 V)
in4: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.99 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.42 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.30 V (min = +2.70 V, max = +3.30 V)
fan1: 421 RPM (min = 0 RPM, div = 32) ALARM
fan2: 1004 RPM (min = 0 RPM, div = 32) ALARM
fan3: 0 RPM (min = 0 RPM, div = 128)
fan4: 0 RPM (div = 128)
SYSTIN: +30.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = diode
CPUTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUXTIN: -128.0°C sensor = diode
PECI Agent 0: +36.0°C (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_TEMP: +49.0°C (high = +80.0°C, hyst = +75.0°C)
PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C)
cpu0_vid: +2.050 V
TESTMODE
fi
awk '{if($1~"Vcore:"){printf"mboard_vcore.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"AVCC:"){printf"mboard_avcc.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"+3.3V:"){printf"mboard_3v3.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"3VSB:"){printf"mboard_3vsb.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"Vbat:"){printf"mboard_vbat.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"cpu0_vid:"){printf"mboard_cpu.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
</pre>
----
<adsense>1</adsense>
These plugins report the
=== DH67CF Fans ===
This plugin reports the fan speeds for an Intel DH67CF motherboard. The plugin should be saved with a filename 'dh67cf_fans' and a link can then be generated in the munin plugins directory:
'''$ ln -s /path/dh67cf_fans /etc/munin/plugins/dh67cf_fans'''
<pre>
#!/bin/sh
#
# Plugin to report D945GCLF2 motherboard temperatures. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_fans.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard Fan Speeds'
echo 'graph_vlabel RPM'
echo 'mboard_fan1.label Inlet fan'
echo 'mboard_fan1.draw LINE1'
echo 'mboard_fan1.type GAUGE'
echo 'mboard_fan2.label CPU fan'
echo 'mboard_fan2.draw LINE1'
echo 'mboard_fan2.type GAUGE'
echo 'mboard_fan1.warning 200:1200'
echo 'mboard_fan2.warning 200:2500'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +85.0°C)
nct6775-isa-0290
Adapter: ISA adapter
Vcore: +0.98 V (min = +0.00 V, max = +1.74 V)
in1: +1.09 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.42 V (min = +2.98 V, max = +3.63 V)
in4: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.99 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.42 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.30 V (min = +2.70 V, max = +3.30 V)
fan1: 421 RPM (min = 0 RPM, div = 32) ALARM
fan2: 1004 RPM (min = 0 RPM, div = 32) ALARM
fan3: 0 RPM (min = 0 RPM, div = 128)
fan4: 0 RPM (div = 128)
SYSTIN: +30.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = diode
CPUTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUXTIN: -128.0°C sensor = diode
PECI Agent 0: +36.0°C (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_TEMP: +49.0°C (high = +80.0°C, hyst = +75.0°C)
PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C)
cpu0_vid: +2.050 V
TESTMODE
fi
awk '{if($1~"fan1:"){printf"mboard_fan1.value %s\n",$2}}' $TMPFILE
awk '{if($1~"fan2:"){printf"mboard_fan2.value %s\n",$2}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
</pre>
=== DH67CF Temperatures ===
This plugin reports the temperatures for an Intel DH67CF motherboard. The plugin should be saved with a filename 'dh67cf_temp' and a link can then be generated in the munin plugins directory:
'''$ ln -s /path/dh67cf_temp /etc/munin/plugins/dh67cf_temp'''
<pre>
#!/bin/sh
#
# Plugin to report DH67CF motherboard temperatures. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_temps.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard Temperatures'
echo 'graph_vlabel Degrees Celsius'
echo 'mboard_core0_temp.label Core0 Temperature'
echo 'mboard_core0_temp.draw LINE1'
echo 'mboard_core0_temp.type GAUGE'
echo 'mboard_core1_temp.label Core1 Temperature'
echo 'mboard_core1_temp.draw LINE1'
echo 'mboard_core1_temp.type GAUGE'
echo 'mboard_chipset_temp.label Chipset Temperature'
echo 'mboard_chipset_temp.draw LINE1'
echo 'mboard_chipset_temp.type GAUGE'
echo 'mboard_system_temp.label System Temperature'
echo 'mboard_system_temp.draw LINE1'
echo 'mboard_system_temp.type GAUGE'
echo 'mboard_core0_temp.warning :75'
echo 'mboard_core1_temp.warning :75'
echo 'mboard_chipset_temp.warning :70'
echo 'mboard_system_temp.warning :45'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +85.0°C)
nct6775-isa-0290
Adapter: ISA adapter
Vcore: +0.98 V (min = +0.00 V, max = +1.74 V)
in1: +1.09 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.42 V (min = +2.98 V, max = +3.63 V)
in4: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.99 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.42 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.30 V (min = +2.70 V, max = +3.30 V)
fan1: 421 RPM (min = 0 RPM, div = 32) ALARM
fan2: 1004 RPM (min = 0 RPM, div = 32) ALARM
fan3: 0 RPM (min = 0 RPM, div = 128)
fan4: 0 RPM (div = 128)
SYSTIN: +30.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = diode
CPUTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUXTIN: -128.0°C sensor = diode
PECI Agent 0: +36.0°C (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_TEMP: +49.0°C (high = +80.0°C, hyst = +75.0°C)
PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C)
cpu0_vid: +2.050 V
TESTMODE
fi
awk '{if($1~"Core"){n=substr($2,1,length($2)-1);printf"mboard_core%d_temp.value %s\n",n,substr($3,1,1+index($3,"."))}}' $TMPFILE
awk '{if($1~"PCH_CHIP_TEMP:"){printf"mboard_chipset_temp.value %s\n",substr($2,1,1+index($2,"."))}}' $TMPFILE
awk '{if($1~"CPUTIN:"){printf"mboard_system_temp.value %s\n",substr($2,1,1+index($2,"."))}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
</pre>
=== DH67CF Voltages ===
This plugin reports the voltages for an Intel DH67CF motherboard. The plugin should be saved with a filename 'dh67cf_voltages' and a link can then be generated in the munin plugins directory:
'''$ ln -s /path/dh67cf_voltages /etc/munin/plugins/dh67cf_voltages'''
<pre>
#!/bin/sh
#
# Plugin to report DH67CF motherboard voltages. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_volts.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard Voltages'
echo 'graph_vlabel Volts'
echo 'mboard_vcore.label Vcore'
echo 'mboard_vcore.draw LINE1'
echo 'mboard_vcore.type GAUGE'
echo 'mboard_avcc.label AVcc'
echo 'mboard_avcc.draw LINE1'
echo 'mboard_avcc.type GAUGE'
echo 'mboard_3v3.label +3V3'
echo 'mboard_3v3.draw LINE1'
echo 'mboard_3v3.type GAUGE'
echo 'mboard_3vsb.label +3Vsb'
echo 'mboard_3vsb.draw LINE1'
echo 'mboard_3vsb.type GAUGE'
echo 'mboard_vbat.label Vbat'
echo 'mboard_vbat.draw LINE1'
echo 'mboard_vbat.type GAUGE'
echo 'mboard_cpu.label CPU0 Vid'
echo 'mboard_cpu.draw LINE1'
echo 'mboard_cpu.type GAUGE'
echo 'mboard_avcc.warning 2.98:3.63'
echo 'mboard_3v3.warning 2.98:3.63'
echo 'mboard_vbat.warning 2.98:3.63'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 0: +37.0°C (high = +80.0°C, crit = +85.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +85.0°C)
nct6775-isa-0290
Adapter: ISA adapter
Vcore: +0.98 V (min = +0.00 V, max = +1.74 V)
in1: +1.09 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.42 V (min = +2.98 V, max = +3.63 V)
in4: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.99 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.05 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.42 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.30 V (min = +2.70 V, max = +3.30 V)
fan1: 421 RPM (min = 0 RPM, div = 32) ALARM
fan2: 1004 RPM (min = 0 RPM, div = 32) ALARM
fan3: 0 RPM (min = 0 RPM, div = 128)
fan4: 0 RPM (div = 128)
SYSTIN: +30.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = diode
CPUTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUXTIN: -128.0°C sensor = diode
PECI Agent 0: +36.0°C (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_TEMP: +49.0°C (high = +80.0°C, hyst = +75.0°C)
PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C)
cpu0_vid: +2.050 V
TESTMODE
fi
awk '{if($1~"Vcore:"){printf"mboard_vcore.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"AVCC:"){printf"mboard_avcc.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"+3.3V:"){printf"mboard_3v3.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"3VSB:"){printf"mboard_3vsb.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"Vbat:"){printf"mboard_vbat.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
awk '{if($1~"cpu0_vid:"){printf"mboard_cpu.value %s\n",substr($2,1,2+index($2,"."))}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
</pre>
----
<adsense>1</adsense>