D945GCLF2
Jump to navigation
Jump to search
Munin plugins for the Intel D945GCLF2 motherboard.
All of these plugins are dependant upon the successful installation of the lm_sensors package prior to their use.
d945gclf2_volts
This plugin reports the PSU voltages for an Intel D945GCLF2 motherboard. The plugin should be saved with a filename 'd945gclf2_volts' and a link can then be generated in the munin plugins directory:
ln -s /path/d945gclf2_volts /etc/munin/plugins/d945gclf2_volts
#!/bin/sh
#
# Plugin to report D945GCLF2 motherboard voltages. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_volts.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard PSU Voltages'
echo 'graph_vlabel Volts'
echo 'mboard_2v5_volts.label 2V5 supply'
echo 'mboard_2v5_volts.draw LINE1'
echo 'mboard_vcore_volts.label Vcore supply'
echo 'mboard_vcore_volts.draw LINE1'
echo 'mboard_3v3_volts.label 3V3 supply'
echo 'mboard_3v3_volts.draw LINE1'
echo 'mboard_5v0_volts.label +5V supply'
echo 'mboard_5v0_volts.draw LINE1'
echo 'mboard_12v0_volts.label +12V supply'
echo 'mboard_12v0_volts.draw LINE1'
echo 'mboard_vcc_volts.label VCC supply'
echo 'mboard_vcc_volts.draw LINE1'
echo 'mboard_1v5_volts.label 1V5 supply'
echo 'mboard_1v5_volts.draw LINE1'
echo 'mboard_1v8_volts.label 1V8 supply'
echo 'mboard_1v8_volts.draw LINE1'
echo 'mboard_cpu0vid_volts.label CPU0 VID supply'
echo 'mboard_cpu0vid_volts.draw LINE1'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
smsc47m192-i2c-0-2d
Adapter: SMBus I801 adapter at 2000
+2.5V: +2.54 V (min = +0.00 V, max = +3.32 V)
VCore: +1.16 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.35 V (min = +0.00 V, max = +4.38 V)
+5V: +5.08 V (min = +0.00 V, max = +6.64 V)
+12V: +12.19 V (min = +0.00 V, max = +15.94 V)
VCC: +3.35 V (min = +0.00 V, max = +4.38 V)
+1.5V: +1.56 V (min = +0.00 V, max = +1.99 V)
+1.8V: +1.78 V (min = +0.00 V, max = +2.39 V)
Chip Temp: +23.0°C (low = -127.0°C, high = +127.0°C)
CPU Temp: +39.0°C (low = -127.0°C, high = +127.0°C)
Sys Temp: +29.0°C (low = -127.0°C, high = +127.0°C)
cpu0_vid: +2.050 V
smsc47m1-isa-0680
Adapter: ISA adapter
fan1: 0 RPM (min = 1280 RPM, div = 4) ALARM
fan2: 5715 RPM (min = 1280 RPM, div = 4)
TESTMODE
fi
awk '{if($1=="+2.5V:"){printf"mboard_2v5_volts.value %s\n",$2}}' $TMPFILE
awk '{if($1=="VCore:"){printf"mboard_vcore_volts.value %s\n",$2}}' $TMPFILE
awk '{if($1=="+3.3V:"){printf"mboard_3v3_volts.value %s\n",$2}}' $TMPFILE
awk '{if($1=="+5V:"){printf"mboard_5v0_volts.value %s\n",$2}}' $TMPFILE
awk '{if($1=="+12V:"){printf"mboard_12v0_volts.value %s\n",$2}}' $TMPFILE
awk '{if($1=="VCC:"){printf"mboard_vcc_volts.value %s\n",$2}}' $TMPFILE
awk '{if($1=="+1.5V:"){printf"mboard_1v5_volts.value %s\n",$2}}' $TMPFILE
awk '{if($1=="+1.8V:"){printf"mboard_1v8_volts.value %s\n",$2}}' $TMPFILE
awk '{if($1=="cpu0_vid:"){printf"mboard_cpu0vid_volts.value %s\n",$2}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
d945gclf2_temps
This plugin reports the temperatures for an Intel D945GCLF2 motherboard. The plugin should be saved with a filename 'd945gclf2_temps' and a link can then be generated in the munin plugins directory:
ln -s /path/d945gclf2_temps /etc/munin/plugins/d945gclf2_temps
#!/bin/sh
#
# Plugin to report D945GCLF2 motherboard temperatures. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_temps.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard Temperatures'
echo 'graph_vlabel Degrees Celsius'
echo 'mboard_chipset_temp.label Chipset Temperature'
echo 'mboard_chipset_temp.draw LINE1'
echo 'mboard_cpu_temp.label CPU Temperature'
echo 'mboard_cpu_temp.draw LINE1'
echo 'mboard_system_temp.label System Temperature'
echo 'mboard_system_temp.draw LINE1'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
smsc47m192-i2c-0-2d
Adapter: SMBus I801 adapter at 2000
+2.5V: +2.54 V (min = +0.00 V, max = +3.32 V)
VCore: +1.16 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.35 V (min = +0.00 V, max = +4.38 V)
+5V: +5.08 V (min = +0.00 V, max = +6.64 V)
+12V: +12.19 V (min = +0.00 V, max = +15.94 V)
VCC: +3.35 V (min = +0.00 V, max = +4.38 V)
+1.5V: +1.56 V (min = +0.00 V, max = +1.99 V)
+1.8V: +1.78 V (min = +0.00 V, max = +2.39 V)
Chip Temp: +23.0°C (low = -127.0°C, high = +127.0°C)
CPU Temp: +39.0°C (low = -127.0°C, high = +127.0°C)
Sys Temp: +29.0°C (low = -127.0°C, high = +127.0°C)
cpu0_vid: +2.050 V
smsc47m1-isa-0680
Adapter: ISA adapter
fan1: 0 RPM (min = 1280 RPM, div = 4) ALARM
fan2: 5715 RPM (min = 1280 RPM, div = 4)
TESTMODE
fi
awk '{if($1=="Chip" && $2 == "Temp:"){printf"mboard_chipset_temp.value %s\n",substr($3,1,1+index($3,"."))}}' $TMPFILE
awk '{if($1=="CPU" && $2 == "Temp:"){printf"mboard_cpu_temp.value %s\n",substr($3,1,1+index($3,"."))}}' $TMPFILE
awk '{if($1=="Sys" && $2 == "Temp:"){printf"mboard_system_temp.value %s\n",substr($3,1,1+index($3,"."))}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
d945gclf2_fans
This plugin reports the fan speeds for an Intel D945GCLF2 motherboard. The plugin should be saved with a filename 'd945gclf2_fans' and a link can then be generated in the munin plugins directory:
ln -s /path/d945gclf2_fans /etc/munin/plugins/d945gclf2_fans
#!/bin/sh
#
# Plugin to report D945GCLF2 motherboard fan speeds. Relies on lm_sensors
# package.
#
# Contributed by Tim Chappell
#
# Magic markers - optional - used by installation scripts and
# munin-config:
#
#%# family=manual
#%# capabilities=autoconf
TMPFILE=/tmp/mboard_temps.$$
DEBUG=false
if [ "$1" = "config" ]; then
echo 'graph_category sensors'
echo 'graph_title Motherboard Fan Speeds'
echo 'graph_vlabel RPM'
echo 'mboard_fan1_speed.label Fan1 Speed'
echo 'mboard_fan1_speed.draw LINE1'
echo 'mboard_fan2_speed.label Fan2 Speed'
echo 'mboard_fan2_speed.draw LINE1'
exit 0
fi
touch $TMPFILE
if [ "$DEBUG" = "false" ]; then
sensors >> $TMPFILE
else
echo "Running in DEBUG mode"
cat>> $TMPFILE <<- 'TESTMODE'
smsc47m192-i2c-0-2d
Adapter: SMBus I801 adapter at 2000
+2.5V: +2.54 V (min = +0.00 V, max = +3.32 V)
VCore: +1.16 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.35 V (min = +0.00 V, max = +4.38 V)
+5V: +5.08 V (min = +0.00 V, max = +6.64 V)
+12V: +12.19 V (min = +0.00 V, max = +15.94 V)
VCC: +3.35 V (min = +0.00 V, max = +4.38 V)
+1.5V: +1.56 V (min = +0.00 V, max = +1.99 V)
+1.8V: +1.78 V (min = +0.00 V, max = +2.39 V)
Chip Temp: +23.0°C (low = -127.0°C, high = +127.0°C)
CPU Temp: +39.0°C (low = -127.0°C, high = +127.0°C)
Sys Temp: +29.0°C (low = -127.0°C, high = +127.0°C)
cpu0_vid: +2.050 V
smsc47m1-isa-0680
Adapter: ISA adapter
fan1: 0 RPM (min = 1280 RPM, div = 4) ALARM
fan2: 5715 RPM (min = 1280 RPM, div = 4)
TESTMODE
fi
awk '{if($1=="fan1:"){printf"mboard_fan1_speed.value %s\n",$2}}' $TMPFILE
awk '{if($1=="fan2:"){printf"mboard_fan2_speed.value %s\n",$2}}' $TMPFILE
# tidy up
/bin/rm -f $TMPFILE
This website publishes a Privacy Policy (link at the bottom of every page). Continued use of this website implies your consent to the use of data outlined in the policy.